Share this ...

Foreword 2018 

Welcome A.R.T. of 2018. It is time for us to reflect the issues in 2017 and start to FOCUS in 2018. We realized that communication is one of important roles in pursuing excellence in Quality and HSE. Hence in 2018, we FOCUS on the new revision of ISO9001:2015, ISO14001:2015 and IATF 16949:2016 transition and “Certified Course” on quality and operational improvement.

We keep enhancing the use of Information Technology to support our training through E-Learning platform @ We also introduce HR companion on electronic – competency information system.

At the same time, we maintain our focus in our specialty in various management system certifications and certification support i.e. ISO9001, ISO14001, IATF16949 and OHSAS 18001. EFR look forward to share the world class best practice with you.

 With a warm welcomes, it is our pleasure to share the knowledge with you in 2018.






Name             :  Edly F. Ramly


Academic Qualification:

  • PhD Candidate (Awaiting Examiner evaluation), Universiti Tun Hussein Onn, Malaysia. Thesis title: “Development of Operation Diagnosis to select operation improvement opportunities”
  • Master of Science (MSc.) In Engineering with Management, Sheffield Hallam University, UK, 2001
  • Bachelor Engineering (BEng. Honour) Manufacturing System with Management, University of Bradford, UK, 1998
  • Certificate in Mechanical Engineering, NCUK Univesity Teknologi Mara, Malaysia, 1996



  • “IEOM Distinguished Industry Award”, awarded by Industrial Engineering and Operation Society (IEOM)-International Conference on Industrial Engineering and Operation Management, at Bandung Indonesia on March, 2018.
  • “Productivity Champion” awarded by Malaysia Productivity Corporation (MPC) on February, 2017.
  • “IEOM Industry Solution Award”, awarded by Industrial Engineering and Operation Society (IEOM), United State of America on September 2016 at Lawrence Technology University, Detroit, USA.
  • “Productivity Specialist” by MPC, Ministry of International Trade and Industry on June, 2014.
  • "Asia Productivity Organization - Lean Promoter" Presented by Minister - Ministry of Productivity Promotion Sri Lanka - Honourable Basheer Segu Dawood on June, 2014
  • “National Industry Specialist” (Pakar Industri Negara) by Department of Skill Malaysia 2010.
  • "EFRC - ASCB Accreditation Certificate" by Stephen Feltham on March, 2010.


Professional Membership:

  • Member of IRQAO (International Registered of Quality Assessed Organization, UNITED KINGDOM)
  • Lead Auditor of International Automotive Task Force (IATF)
  • Lead Auditor IRCA
  • Registered Trainer with Malaysian Productivity Corporation
  • Registered Trainer with Human Resources Development
  • Director of Koperasi Automasi dan Teknologi Hijau Berhad
  • Honourable Secretary of Johor Cost and Quality Society
  1. Industrial Experience:




Managing and provisions of training, and auditing in the implementation of ISO/TS 16949, ISO9001, ISO14001, OHSAS18001, Six Sigma, Lean Manufacturing and others quality improvement program.



Mac 2003- Jul 2006 Senior Consultant

Provision of training, consultancy services and auditing in the development and implementation of ISO 9001, ISO/TS 16949, ISO14001, OHSAS18001, Six Sigma, Lean Manufacturing and others quality improvement program.



1998- 2003



QMR QS9000

  • Mentor for Lean and Gemba Kaizen workshop for Asia Pacific business group.
  • Project Leader for ERP system (QAD-MFG PRO)
  • Trainer & Coach for Six Sigma


  1. Training/ Seminar/ Conference/ Workshop (Presenter):


Mr Edly has conducted many rounds of various high impact trainings and workshop in the area below in most effective, interactive and fun training with majority of positive feedback from the training participants. The Conference/ Seminar that Mr Edly have conducted including World Engineering Congress, International Conference for Quality and Reliability, Asia Productivity Organization (APO)-NIPO Lean for hospital conference and many more. The training commonly conducted by Mr Edly as followed:


Productivity, Operation and Supply Chain Management


  • Lean Sensei
  • Lean Mentor
  • Lean Sigma Black/ Green Belt
  • Lean Awareness and strategy for Implementation
  • Value Stream Mapping
  • 5 S
  • TPM
  • Changeover reduction (SMED)
  • JIT – Kanban
  • Productivity Measurements and Improvement


Customer Management

  • Customer Satisfaction
  • Customer Services Excellence


Quality Management System

  • ISO/TS 16949 QMS for automotive
  • ISO 13485 QMS for Medical Device
  • AS9100 QMS for Aerospace Industry
  • ISO 9001 awareness and auditor
  • Certified Quality Inspector/ Engineer
  • Failure Mode & Effects Analysis (FMEA)
  • Statistical Process Control
  • Measurement System Analysis (MSA)
  • Business Planning & Benchmarking
  • Poka-Yoke – Strategy towards zero defect
  • Effective Calibration System
  • Problems Solving Through 7 QC Tools
  • Root cause Analysis
  • Supllier Quality Assurance
·         8 Discipline (8D) Team Oriented Problem Solving
·         Design of Experiment


HSE Management

  • ISO14001 awareness and auditor
  • OHSAS18001 awareness and auditor
  • HIRAC and Aspect Impact
  • HSE Legal and other requirements
  • Health and Safety committe
  • Ergonomic – Principal and Practices
  • Manual Handling Risk Assessment
  • Workplace Inspection
  • Incident Investigation
  • Emergency Preparedness and Response
  • Office Safety Toward Effective & Efficient Office
  • Lab safety
  • Lock Out Tag Out



  1. 6 Organization Assisted/ Consulted/ Trained:


Mr. Edly already assist various organization for development, implementation, training and/or auditing of various Lean, Six Sigma, Operation and HSE Management Systems and improvement in the following organization:


  • Perbadanan Kemajuan Negeri Pahang
  • Johor Corporation
  • Local Authority – MPPG
  • Omni Precision
  • GeSHen Plastic
  • Malaysia Shipyard and Engineering (MSE)
  • Wayco Manufacturing Sdn Bhd
  • Natoleo Sdn Bhd
  • Flextronic Technology Sdn Bhd
  • Podoyo Plastics Industries
  • Puteri Specialist Hospital
  • Johor Specialist Hos[pital
  • Eurcopter Malaysia
  • Weststar Aviation
  • Astro Broadcasting Centre
  • Hantong Spring Sdn Bhd
  • Elite Precision Sdn Bhd
  • Precision Plastic Industries
  • Chestronic Sdn Bhd - Certified by AFAQ 2007
  • E-Control Sdn Bhd - Certified by AFAQ 2007
  • PNA Technologies Sdn Bhd - Certified by AFAQ 2006
  • Samtec (M) Sdn Bhd – Certified by BSI 2006
  • Kenwood Electronic (M) Sdn Bhd – Certfied by SGS 2006
  • Wonderful Wire and Cable Bhd – Certified by AFAQ 2005
  • Sumitomo Electronic interconnect (M) Sdn Bhd – Certified by SGS 2005
  • FCI (M) Sdn Bhd– Certified by Lloyds 2004
  • BASF (M) Sdn Bhd - Certified by Lloyds 2004
  • Lucas Automotive– Certified by DQS 2003
  • GG Circuits Industries Sdn Bhd – Certified by SIRIM 2003
  • JK Wire Sdn Bhd (Training)
  • Hokuden (M) Sdn Bhd (Training)
  • Johnson Control (M) Sdn Bhd (Training)
  • Southern Wire (Training)
  • And many mores


  1. Other Related Strength(s):


Presently Mr. Edly is the renowned coach, auditor, consultant and trainer.  With his excellent interpersonal and communication skills, he has conducted various high impact trainings and workshop in the area of management system including quality, environment and occupational health and safety, workplace improvement, variation and waste reduction, and practical problem solving techniques including statistical tools.  Due to his extensive exposure in different management systems and strong project management skill, he is currently providing Quality (ISO9001), Environment (ISO14001) and Safety (OHSAS18001 & MOSH) management system related consultancy, trainings and supports to local and multi-national companies that seek quality improvement and breakthrough. Apart from being trained as Lead Auditor, he is also qualified auditor by Society of Motor Manufacturer and Trader (SMMT) Industry Forum for ISO/TS 16949. Edly also one of approved trainer by Department of Occupational Safety and Health (DOSH) for continuous education program for safety officer. During his service with Pera Neville Clarke, he is also tutor for QMS lead auditor course


His industrial experience was in the automotive industry. During his stayed with the TRW Automotive, he was tasked with the responsibility of promoting and implementing Lean and Six-Sigma within the Organization. Due to his extensive exposure in Lean and Six-Sigma Management System, he was invited by National Productivity Corporation (NPC) to conduct public training in the area of Six-Sigma implementation.  In addition have been conducting many round of lean workshop across Asia Pacific, Quality Management System related course and Six Sigma.



Search EFR Certified Client

Company Name:

Registration No:

For inquiries

EFR Certification - EFRC

ASCB (E) Ltd
6, Ferris Place, Bournemount, Dorset,

Malaysia Office:

2909-B (Level 2), Jalan Merbau 3,
Bandar Putra,
81000 Kulaijaya, Johor, Malaysia.

India Office:

EFR Certification Services
Chennai, Tamil Nadu, India.

Iran Office:

EFR Certification Iran
3 rd Floor, No.1 , Keivan Alley, 4 th St., FatemiAve, Tehran, Iran.